Xypex Products

The Xypex line of crystalline, concrete waterproofing products have been developed to meet the wide variety of application situations faced by industrial users. Xypex can be applied as an admix, as a slurry coat, or by the dry shake method.

ADMIX C-1000NF

With the Admix C-Series, Xypex's unique crystalline dry powder compound for the waterproofing, protection and improvement of concrete is added to the concrete mix at time of batching. Admix C-1000NF and C-2000NF have each been formulated to meet specific project and temperature conditions.

XYPEX CONCENTRATE DS-1 and DS-2

DS-1 and DS-2 are special dry shake formulations of Xypex Concentrate designed specifically for horizontal concrete surfaces such as parking decks and floor slabs. Applied by hand or by mechanical spreader, DS-1 and DS-2 are trowelled into fresh concrete prior to finishing. DS-2 is used for concrete structures where increased abrasion resistance is required.

XYPEX CONCENTRATE

Xypex Concentrate is the most chemically active of the Xypex waterproofing products. When mixed with water, this light grey powder is applied as a slurry coat to above-grade or below-grade concrete either as a single coat or as the first of a two-coat application. It is also mixed in Dry-Pac form for sealing strips at construction joints, or for the repairing of cracks, faulty construction joints and honeycombs.

XYPEX MODIFIED

Xypex Modified can be applied as a second coat to reinforce Xypex Concentrate or by itself to damp-proof the exterior of foundation walls. Applied as a second coat over Concentrate, Modified produces a harder finish and speeds the curing of the Concentrate. Where damp-proofing is required, a single coat of Modified may be used as an alternative to a spray/tar emulsion.

XYPEX MEGAMIX I

This product can be applied as a thin parge coat - up to 10mm thick to waterproof and protect masonry and deteriorated concrete surfaces. With excellent bond strength and resistance to aggressive environments this product is suitable for relining swimming pools, tanks, tunnels and other deteriorated concrete surfaces.

XYPEX MEGAMIX II

Is a one component, high build repair mortar, which is enhanced with Xypex's unique crystalline waterproofing and chemical protection technology. This product can be applied to a thickness of 50mm in a single application and is suitable for repairing deteriorated concrete in marine and sewage environments.

XYPEX PATCH 'N PLUG

Xypex Patch'n Plug is formulated as a crystalline, fast-setting, non-shrink, high-bond-strength, hydraulic cement compound for concrete repairs. It stops flowing water in seconds and is used to seal cracks, fill tie-holes and other defects in concrete.

XYPEX FCM

Xypex FCM is specially designed for repaiting cracks subject to movement, sealing construction joints, restoring deteriorated concrete and waterproofing concrete structures. FCM has exceptional adhesive and elongation characteristics and is often used in conjunction with the Xypex Crystalline Concrete Waterproofing and Protection System. FCM is a two component product consisting of a specialized liquid polymer dispertion and a cementitious powder component. These ingredients are mixed just prior to application.

XYCRYLIC ADMIX

Xycrylic Admix is a water-based polymer dispersion specifically designed for fortifying portland cement compositions. The liquid is milky-white in colour and has a solids content of 40%. Xycrylic-Admix can be used with Xypex Patch'n Plug to increase bond strength.

Page